In order to maximize the biomass yield in fed-batch cultivations of Saccharomyces cerevisiae, a pulse feeding strategy originally developed by Mats Åkesson at the department of automatic con-trol (Åkesson, 1999), was implemented. The controller was intended to keep the specific glucose uptake rate, qs, below the critical specific glucose uptake rate qs crit , to avoid over-flow metabolism. Simulat

The aim of this project is to make a predictive controller of a part of an irrigation channel. The channel is called ``The Haughton Main Channel'' (HMC) and is situated in Queensland. Irrigation channels are used by farmers all around the year and it is important that they deliver water on demand. The project has been made in cooperation with the Department of Electrical and Electronic Eng

Image registration of X-ray images is used to correctly align the patient before the cancer tumour is treated with sets of high dose X-ray radiation. Before the first treatment, a simulated X-ray image is taken showing the best possible localisation of the tumour. From then on, after each of the radiation treatments of the tumour, a low dose of the X-ray theurapeutic radiation is used to take an i

This ‘Automatic Test System (ATS) for Network Servers’ Master Thesis project was carried out from September 2000 till March 2001 at Axis Communication AB, Lund. The project was to build a common test system platform for all future tests of Axis network servers’ products. Thus, overcoming the current practice of costly dedicated test system development for individual products. The project is a gra

Modern gas turbines use lean premixed combustion to achieve the best compromise between emissions and efficiency. This type of combustion is very sensitive to thermoacoustic instabilities causing high pressure sound waves. One reason for these intense pressure fluctuations is the flame is acting as source of sound, that is placed in an acoustic resonator accumulating acoustic energy. Due to the re

This master thesis project has been performed in cooperation with TAC, a building automation company in Malmö and the Department of Automatic Control at LTH. TAC has experienced problems for some time with their PID controllers. This master thesis has therefore investigated the use of PID control at TAC, the problems with the existing controllers. The thesis also describes a new PID controller tha

Clarifying the mechanisms maintaining atrial activity during atrial fibrillation (AF), still remains as a relevant topic. The purpose of this master thesis is to apply correlation analysis and system identification methods to study spatial and temporal propagation of atrial activation along coronary sinus (situated in the posterior left part of the heart, in the groove between left atrium and left

This rapport investigates the transmitter of the Ericsson Bluetooth radio. The open loop modulation scheme of the existing design is theoretically very simple but difficult to implement with available components. Frequency drift of the carrier is a common result of open loop modulation. This work therefore investigates an idea of frequency regulation where the regulation is active during modulatio

The report describes the development of a global model of a simple gas turbine in order to simulate the dynamic behaviour. The Modelica language is used for the creation of the model. The model is based on the evaporative gas turbine located in the Department of Heat and Power Engineering in Lund. This turbine was run as a conventional turbine before including the heat exchange and the evaporative

This project considers a special class of aero-dynamics of two different underactuated systems. The two systems under consideration are the Pendubot (actuator at the hip) and the Acrobot (actuator at the knee). The main objectives are to show stability and periodicity of the two systems. The next step is to change the zero-dynamics such that resulting periodic orbits produce walking gait patterns.

To use vision in a robotic setting it is important to achieve realtime performance. Real-time vision may be used to directly steer robots using for instance visual servoing techniques. In this thesis, an experimental vision setup using a stereo rig mounted on an industrial robot (ABB Irb-6) was built from ground up and then used to perform two experiments; visual servoing and collection of data fo

This is a report of how the two Telelogic development tools the SCADE Suite, and the SDL Suite can be used together, combining a time-driven language and an event-driven language. Suggestions on how the tools can be integrated are presented. The report also suggests how Telelogic can improve the SDL Suite from a hard real-time aspect. Last part of the report shows how the scheduling algorithm “Ear

Many machines and robots working today in factories are programmed to perform the same task repeatedly. By observing the tracking error in each iteration of the same task it becomes clear that it is actually repetitive, even though disturbances from noise and possibly sligthly changing friction dynamics affect the response. The idea of Iterative learning Control D ILC E is to use the knowledge fro

When designing an automatic brake control system for a car it is important to have a mathematical model of the vehicle to base the design upon. Since careful modeling of the entire car would encompass far too many variables, the most care is usually taken to the wheels and the tyres, as those parts contain most of the dynamics influential to the process. During braking the tyres deform because of

Processes with long dead times are among the most difficult to control. This has urged the development of controllers that cope with this kind of delays. A possible approach is to use a model predictive controller, i.e. a controller with an internal model of the process and its dead time. In ABB’s new control system, Control IT, there exists such a controller, namely the PPI controller. PPI stands

Real-time vision allows the direct steering of a robotic manipulator. In this thesis we use a stereo rig mounted on an industrial robot (ABB IRB-6/2) which gives us information about the end effector position of a second robot (ABB IRB-2000/3). This second robotic manipulator performs the task of tracking a moving object, which in our case is a rolling ball. The first concern of this project is to

One way to increase the flexibility of industrial robots in manipulation tasks is to integrate additional sensors in the control systems. Cameras are an example of such sensors, and in recent years there has been an increased interest in vision based control. However, it is clear that most manipulation tasks can not be solved using position control alone, because of the risk of excessive contact f

To analyse the connection between kinematics and stabilizing forces related to human postural dynamics, fourteen normal subjects were investigated with posturography. Stimulation signals according to Pseudo-Random- Binary-Sequence patterns were applied to each subject. The stimulation consisted both of calf vibration and of combined calf vibration and galvanic stimulation to the inner ear. The tes

The goal for this master thesis was to investigate the possibility of using an existing web server and modify it so it can be used in ABB controllers. The work has resulted in two different versions of a web server. The basic functionality is the same for both versions. The web servers are able to present a number of controller-related information. For example: hardware, which control programs tha

A storage control system named Astro is developed and sold by MA-system in Lund. This system is used for controlling the flow of material, and a central part is to assign tasks to the different trucks in the system. Every task takes a certain time to execute, and the trucks drive a specific total time in the storage. This total time depends on in which order the tasks are executed. A favorable ord