This thesis is done in cooperation with Dresser Wayne AB in Malmö and the objective has been to investigate if it is possible to use the X-flo meter, see Figure 1, in an LPG-dispencer. An increased pressure is used in the LPG-system, which involves a higher risk of leaking and strength problems. During the development consideration has been taken to a new outlet, though other couplings are used in

Our paper tries to verify the relation between international banks’ expansion and international automotive corporations’ overseas business in China. Pervasive phenomena indicate that foreign banks take following their clients as the initial strategy when they start overseas business in China’s market. As many previous literatures analyzed, in the beginning stage in a new foreign market, multinatio

A common, and reoccurring, problem with aluminum alloy car wheel rims is their ease of becoming scratched and damaged during normal operation. This phenomenon is unwanted not only as it aggravates visual appearance, but also as scratches and chippings can contribute to unsuitable product property changes. The study aims at developing one, or several, product concepts of how to protect aluminu

This is the report of a master thesis in Mechanical Engineering with Industrial Design at Lund Institute of Technology, in collaboration with Dresser Wayne AB in Malmö. This master thesis aims to develop and design a new compact pay terminal for use at gas stations. Before the end of 2010 a new standard for credit card handling will be introduced in most of Europe. This new standard is called EM

This master thesis has been carried out in collaboration between Lund Institute of Technology and the department Kitchen&Dining at IKEA of Sweden in Älmhult. The aim for this project has been to develop new products in the kitchen in hence to make everyday life easier for people above 50 years and at the same time make it better for all IKEA’s customers. Enhanced general health conditions

This is a Master Thesis about the use of mineral glass in mobile phone front windows. A brief introduction to glass as a material and its behavior is followed up by our own research and investigations. We have looked at existing and unreleased phones from Sony Ericsson that use or will use mineral glass. We have also examined some competitor phones. All gathered information was analyzed, sorte

Problem: How can a medium-sized technical consultant company, which drastically expands, both by number and geographically, maintain and improve the quality of the product development process, continue to make better products and at the same time live up to the regulatory demands of today? How can a consultant company work easier and more effective using one mutual tool, despite diverse types

Problem statement This master thesis was initiated since today, when developing a new mobile phone at Sony Ericsson, it is difficult to get a perception of the ergonomics and the tactility of the keyboard before the first design prototype (DP0 and DP1) is built. The SLA block model used today is completely solid and consequently a secured decision of the final design can not be made in this phase

Problem statement Perform a thorough concept study based on the task of investigating the difficulties which arise when applying a coffeemaker for mobile use. Method Ulrich & Eppinger, Product Design and Development Conclusion The fall-out of the Master Thesis was a proper mapping of the target group and its sectors of application resulting in a modular concept designed for the users to

Problem statement: Consumption of bottled water has increased considerably the last decade. Transportation of bottles and exploration of natural wells, effect the environment negatively. By developing a product that produces pure and safe drinking water right on the spot, would both save money for the customer and spare the environment. Purpose: The primary target goal has been to come up with

This is the report of a master thesis in Mechanical engineering with industrial design at Lund University Faculty of Engineering, in collaboration with Ikea Components AB (ICOMP) in Älmhult. Furniture dampers are a desired feature by most customers and are practically a standard in kitchen drawers and cabinet fronts. IKEA’s vision is that this feature will spread to involve the entire househo

This thesis is the result of a work for Saab Automobile AB in Trollhättan, and more specifically the Department of under hood design. The project has been to Lund University and finishes my education in Technical Design. Supervisor at the company who has assisted me with much help is Andreas Barbunopulos and supervisors at the school have been Ola Carlquist and Karl-Axel Andersson. The purpose

The objectives of this master’s thesis were carried out for, and in cooperation with, a medical company. The goal was to assist in the development of a new product suited for organ transplantation. The product has several purposes including: helping to increase the proportion of organs suitable for transplantation, improving transplantation procedures, and increasing the length of time between org

This master thesis is written in collaboration with the company Caran AB in Lund, now known as Semcon Caran AB. Semcon Caran AB is a large Swedish consulting firm who were hired by the principal LG Håkansson, an entrepreneur from Svedala. The purpose of this thesis is to design a coffee machine for use in the home environment. The thesis is written in collaboration with two other students, Sevan

Problem Statement: The project started with a request from IKEA to contribute more to the environment. The task for this project, issued by IKEA, was to create a concept for a free-standing indoor storage unit for recyclable waste. The unit should hold at least seven different types of waste: cardboard, plastic, paper, metal, glass, deposit waste and some smaller hazardous waste, such as batteries

The purpose of this thesis was to introduce new and innovative solutions in the field of weapon packaging. Integration of the concept Insensitive Munitions1 (IM) in the packaging was also a main objective. The method used to achieve this thesis is a merge of the product development methods derived by Ulrich and Eppinger and methods taught in the course Designmetodik IDE062. Designer tools li

Problem Statement Thule is the world leading developer and manufacturer of transportation solutions. Their company strategy is to enable active families, professionals and outdoor enthusiasts to transport equipment by vehicle safely, easily and in style. RV users of today have higher demands on their equipment and they fill their cars with every type of conveniences found in a modern home. With

With increasing demands on consumer products, attempts have been made to integrate all aspects of the product by the use of Cross-Functional Teams (CFTs) in product development work. However, research has shown that this integration often fails to reach its full potential. Considering the interdisciplinary interaction between industrial designers and engineering designers in CFTs, barriers p

The aim of the project is to get a holistic picture of what happens to a person from the moment she dies till she is buried – transport, storage, ceremony etc. What can be done to adapt this procedure to the demands of the environment? Changing the material of a coffin is only one way of making the funeral closer to a total adaptation to the environment. I cannot change the contaminating burial me

The debate over Corporate Social Responsibility is present in many parts of society. The business sector’s engagement in CSR has increased rapidly during the last decades. One important question this brings out is how CSR should be governed. The debate consists in large of two views – CSR should be regulated by law or forced regulation or CSR should be managed through private and civil regulation